{"id":7730,"date":"2026-09-11T01:02:35","date_gmt":"2026-09-11T01:02:35","guid":{"rendered":"https:\/\/yiroxautoparts.com\/?p=7730"},"modified":"2026-09-11T01:02:37","modified_gmt":"2026-09-11T01:02:37","slug":"ev-charging-accessories-sample-order-checklist","status":"publish","type":"post","link":"https:\/\/yiroxautoparts.com\/pt\/ev-charging-accessories-sample-order-checklist\/","title":{"rendered":"Lista de verifica\u00e7\u00e3o de pedido de amostra de acess\u00f3rios de carregamento de VE: Encaixe, Teste e Aprova\u00e7\u00e3o"},"content":{"rendered":"<p>An EV charging accessory sample order should define the exact SKU or revision, connector and fitment, quantity and variants, target market, test conditions, documents, packaging expectations, and approval criteria. Record the approved sample so later production can be compared with a controlled reference instead of an informal prototype or product photo.<\/p>\n<p>A sample is not simply a small first order. It is the buyer\u2019s opportunity to prove that the quoted configuration is the configuration the team can install, sell, document, and reorder. The sample should answer practical questions before a production commitment: Does it fit the intended vehicle, charger, outlet, station, or mounting surface? Does it perform within the requested boundary? Do the documents identify the same product? Can the packaging and label be released for the target market?<\/p>\n<p>Use this checklist with the <strong><a href=\"https:\/\/yiroxautoparts.com\/ev-charging-accessories-buying-guide\/\">EV charging accessories buying guide<\/a><\/strong> when moving from category selection to an actual supplier decision. The upstream <strong><a href=\"https:\/\/yiroxautoparts.com\/ev-charging-accessories-rfq-template\/\">EV charging accessories RFQ template<\/a><\/strong> should define what the supplier quotes. This guide defines how the buyer should order, test, record, and approve the sample.<\/p>\n<h2 id=\"table-of-contents\">Table of Contents<\/h2>\n<ul>\n<li><a href=\"#what-is-an-ev-charging-accessories-sample-order-checklist\">What Is an EV Charging Accessories Sample Order Checklist?<\/a><\/li>\n<li><a href=\"#what-should-be-defined-before-ordering-samples\">What Should Be Defined Before Ordering Samples?<\/a><\/li>\n<li><a href=\"#how-many-samples-and-variants-should-be-ordered\">How Many Samples and Variants Should Be Ordered?<\/a><\/li>\n<li><a href=\"#how-should-fitment-and-function-be-checked\">How Should Fitment and Function Be Checked?<\/a><\/li>\n<li><a href=\"#what-appearance-and-packaging-checks-belong-in-sample-approval\">What Appearance and Packaging Checks Belong in Sample Approval?<\/a><\/li>\n<li><a href=\"#which-documents-and-traceability-records-should-accompany-a-sample\">Which Documents and Traceability Records Should Accompany a Sample?<\/a><\/li>\n<li><a href=\"#how-should-buyers-record-sample-results-and-approval\">How Should Buyers Record Sample Results and Approval?<\/a><\/li>\n<li><a href=\"#what-copyable-sample-order-and-approval-template-can-buyers-use\">What Copyable Sample Order and Approval Template Can Buyers Use?<\/a><\/li>\n<li><a href=\"#how-should-buyers-control-changes-after-sample-approval\">How Should Buyers Control Changes After Sample Approval?<\/a><\/li>\n<li><a href=\"#conclusion-approve-a-controlled-reference-not-a-verbal-promise\">Conclusion: Approve a Controlled Reference, Not a Verbal Promise<\/a><\/li>\n<li><a href=\"#frequently-asked-questions\">Frequently Asked Questions<\/a><\/li>\n<li><a href=\"#references\">References<\/a><\/li>\n<\/ul>\n<h2 id=\"what-is-an-ev-charging-accessories-sample-order-checklist\">What Is an EV Charging Accessories Sample Order Checklist?<\/h2>\n<p>An EV charging accessories sample order checklist is a controlled pre-production record that connects the requested product to its identity, fitment, test conditions, evidence, packaging, decision, and next action. It is used by procurement, engineering, quality, product, and operations teams before approving a production order or market release.<\/p>\n<p>The checklist is different from a generic product inspection sheet. It starts before the sample ships and fixes the conditions for a fair decision. It should state:<\/p>\n<ul>\n<li>What exact product is being sampled.<\/li>\n<li>Which vehicle, charger, connector, station, cable, or mounting interface must be matched.<\/li>\n<li>Which variants are included or excluded.<\/li>\n<li>Which tests and observations are required.<\/li>\n<li>What documents and revisions must be returned.<\/li>\n<li>Who can approve, reject, or conditionally approve the sample.<\/li>\n<li>What must happen if the supplier changes the product after approval.<\/li>\n<\/ul>\n<p>This distinction matters for cables, adapters, connector caps, holders, and mounting accessories. Two items can look similar while differing in connector direction, key dimensions, current rating, cable diameter, retention, or intended environment. A controlled sample record preserves the reason one configuration was accepted.<\/p>\n<h2 id=\"what-should-be-defined-before-ordering-samples\">What Should Be Defined Before Ordering Samples?<\/h2>\n<p>Before ordering a sample, define the product identity, business use case, target market, interfaces, acceptance criteria, and supplier response. The sample request should be specific enough that the supplier cannot choose an unapproved configuration on the buyer\u2019s behalf.<\/p>\n<figure class=\"wp-block-image size-large\"><img fetchpriority=\"high\" decoding=\"async\" width=\"1448\" height=\"1086\" src=\"https:\/\/yiroxautoparts.com\/wp-content\/uploads\/2026\/09\/ev-charging-accessories-sample-order-checklist-sample-bench-iphone.png\" alt=\"Technician measuring an EV charging cable sample and connector with a caliper at a garage workbench\" class=\"wp-image-7771\" title=\"\" srcset=\"https:\/\/yiroxautoparts.com\/wp-content\/uploads\/2026\/09\/ev-charging-accessories-sample-order-checklist-sample-bench-iphone.png 1448w, https:\/\/yiroxautoparts.com\/wp-content\/uploads\/2026\/09\/ev-charging-accessories-sample-order-checklist-sample-bench-iphone-300x225.png 300w, https:\/\/yiroxautoparts.com\/wp-content\/uploads\/2026\/09\/ev-charging-accessories-sample-order-checklist-sample-bench-iphone-1024x768.png 1024w, https:\/\/yiroxautoparts.com\/wp-content\/uploads\/2026\/09\/ev-charging-accessories-sample-order-checklist-sample-bench-iphone-768x576.png 768w, https:\/\/yiroxautoparts.com\/wp-content\/uploads\/2026\/09\/ev-charging-accessories-sample-order-checklist-sample-bench-iphone-16x12.png 16w\" sizes=\"(max-width: 1448px) 100vw, 1448px\" \/><figcaption>The sample process should end with a recorded decision, not just a verbal statement that the sample looks acceptable.<\/figcaption><\/figure>\n<p>Use one sample reference per configuration, such as <code>SA-001<\/code>, <code>SA-002<\/code>, and <code>SA-003<\/code>. Record the following before the purchase order or sample request is released:<\/p>\n<table>\n<thead>\n<tr>\n<th>Definition area<\/th>\n<th>Information to lock before sampling<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>Project and use case<\/td>\n<td>Home installation, installer trial, distributor listing, fleet deployment, OEM program, or private-label launch<\/td>\n<\/tr>\n<tr>\n<td>Target market<\/td>\n<td>Country or region, sales channel, language, label boundary, and delivery destination<\/td>\n<\/tr>\n<tr>\n<td>Product identity<\/td>\n<td>Buyer line item, supplier SKU, model, revision, included parts, and known alternatives<\/td>\n<\/tr>\n<tr>\n<td>Fitment<\/td>\n<td>Vehicle group, inlet, charger, outlet, station, cable, mounting surface, fastener, or drawing reference<\/td>\n<\/tr>\n<tr>\n<td>Technical boundary<\/td>\n<td>AC or DC mode, voltage, current, phase, cable length, temperature, load, dimensions, bend radius, and environment<\/td>\n<\/tr>\n<tr>\n<td>Acceptance<\/td>\n<td>Fitment, function, appearance, dimensions, documents, packaging, label, and traceability criteria<\/td>\n<\/tr>\n<tr>\n<td>Decision<\/td>\n<td>Pass, conditional approval, rework and re-test, rejection, or document hold<\/td>\n<\/tr>\n<tr>\n<td>Ownership<\/td>\n<td>Buyer reviewer, supplier contact, quality owner, engineering owner, and approval date<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<p>Also define what the sample does not prove. A physical sample may confirm mating and dimensions without proving every target-market document or long-term durability claim. A document pack may confirm a declared rating without proving fitment on every vehicle in the buyer\u2019s list. Write those limits into the approval record so the team does not treat a partial result as a complete release.<\/p>\n<h2 id=\"how-many-samples-and-variants-should-be-ordered\">How Many Samples and Variants Should Be Ordered?<\/h2>\n<p>Order enough samples to cover the decision, not simply the minimum quantity a supplier is willing to ship. The quantity should reflect the number of connector variants, vehicle or charger interfaces, packaging versions, color or branding versions, and independent test conditions.<\/p>\n<p>A practical allocation is:<\/p>\n<ul>\n<li><strong>One reference sample<\/strong> for identity, dimensions, appearance, documents, and controlled storage.<\/li>\n<li><strong>One fitment sample<\/strong> for mating, insertion, removal, locking, clearance, and installation checks.<\/li>\n<li><strong>One functional or test sample<\/strong> when testing could damage, age, or alter the product.<\/li>\n<li><strong>One packaging or private-label sample<\/strong> when artwork, label, barcode, bundle contents, or retail packaging is part of approval.<\/li>\n<li><strong>Additional variant samples<\/strong> for each connector, length, cable construction, mounting pattern, or market version that cannot be represented by one configuration.<\/li>\n<\/ul>\n<p>This is a planning method, not a universal sample count. If the same physical unit can complete every non-destructive check and the buyer has a documented reason to use fewer samples, record that reason. If a supplier sends one sample for several different SKUs, do not assume the result transfers across them without a defined equivalence basis.<\/p>\n<p>For each sample, record:<\/p>\n<ul>\n<li>Sample ID, supplier SKU, model, revision, lot or batch, and shipment date.<\/li>\n<li>Variant description, connector direction, cable length, color, material, packaging, and included accessories.<\/li>\n<li>Intended test owner and location.<\/li>\n<li>Whether the sample is for reference, fitment, functional testing, destructive testing, packaging, or reserve.<\/li>\n<li>Whether the sample must be returned, retained, modified, or quarantined after testing.<\/li>\n<\/ul>\n<p>The sample quantity should also match the buyer\u2019s actual decision. A distributor listing one cable may need fewer physical variants than a fleet program covering several vehicle groups. An OEM or private-label brand may need separate approval for product, packaging, label, manual, and bundled contents.<\/p>\n<h2 id=\"how-should-fitment-and-function-be-checked\">How Should Fitment and Function Be Checked?<\/h2>\n<p>Fitment and function should be checked against the buyer\u2019s stated vehicle, charger, connector, station, or mounting references under repeatable conditions. A sample that mates once on a workbench is not automatically approved for every model or site listed in the quotation.<\/p>\n<p>Start with a fitment checklist:<\/p>\n<ul>\n<li>Confirm the sample\u2019s connector type, interface, direction, keying, and locking features.<\/li>\n<li>Match the sample against the intended vehicle inlet, charger outlet, cable, station, holder, cap, cover, or mounting interface.<\/li>\n<li>Check insertion, removal, latch or lock engagement, release force, and clearance around the interface.<\/li>\n<li>Check that the cable, connector, holder, cap, or mount does not interfere with adjacent surfaces, doors, covers, buttons, or cable routing.<\/li>\n<li>Compare critical dimensions against the supplier drawing and the buyer\u2019s reference drawing.<\/li>\n<li>Confirm that the cable diameter, weight, bend radius, and storage path match the holder or mount.<\/li>\n<li>Record every tested model and every model that was not tested.<\/li>\n<li>Photograph the interface and note the sample ID in each record.<\/li>\n<\/ul>\n<p>For functional checks, define the intended operation instead of writing \u201cworks correctly.\u201d Depending on the accessory, that may include continuity, charging initiation, pilot or proximity behavior, locking, cable support, cap retention, connector protection, mounting stability, or safe removal. Keep the test within the buyer\u2019s approved equipment, procedures, and qualified personnel. Do not improvise live electrical tests or treat a visual check as proof of electrical safety.<\/p>\n<p>The <strong><a href=\"https:\/\/yiroxautoparts.com\/ev-charging-accessories-compatibility-checklist\/\">EV charging accessories compatibility checklist<\/a><\/strong> can be used to build the model and connector list. For cable-specific physical checks, use the <strong><a href=\"https:\/\/yiroxautoparts.com\/ev-charging-cable-quality-inspection\/\">EV charging cable quality inspection checklist<\/a><\/strong> after the sample scope is fixed. That separation keeps this article focused on the approval decision rather than repeating a full production QC procedure.<\/p>\n<p>Where standards are relevant, identify them in the test plan and document the edition or product scope. IEC 61851-1 addresses general requirements for EV conductive charging systems, including connection and electrical-safety aspects. It also includes provisions related to adaptors, cable protection, marking, and user-manual information within its scope. See IEC 61851-1:2017 as <strong><a href=\"#reference-1\">1<\/a><\/strong>. Connector and inlet references should be mapped to the applicable product requirements, with IEC 62196-1 cited as <strong><a href=\"#reference-2\">2<\/a><\/strong> and used as a standards reference rather than as a blanket approval statement.<\/p>\n<h2 id=\"what-appearance-and-packaging-checks-belong-in-sample-approval\">What Appearance and Packaging Checks Belong in Sample Approval?<\/h2>\n<p>Appearance and packaging checks belong in sample approval whenever the buyer will list, install, resell, bundle, or private-label the product. These checks should confirm that the product can be identified and handled correctly, not merely that it looks attractive in a photograph.<\/p>\n<p>Review the product itself for:<\/p>\n<ul>\n<li>Surface finish, color, texture, scratches, burrs, cracks, gaps, contamination, and molding or assembly marks.<\/li>\n<li>Connector housing, pins or contacts, strain relief, cable jacket, cap or cover fit, fasteners, hooks, clips, and labels.<\/li>\n<li>Markings, symbols, model references, ratings, warnings, serial or lot references, and label position.<\/li>\n<li>Consistency across variant samples.<\/li>\n<li>Odor, residue, sharp edges, loose parts, or packaging damage that could affect installation or use.<\/li>\n<\/ul>\n<p>Review the packaging for:<\/p>\n<ul>\n<li>Product protection during shipment and storage.<\/li>\n<li>Correct product, accessories, manuals, labels, and bundle contents.<\/li>\n<li>Inner and outer packaging dimensions, carton quantity, barcode, language, and branding.<\/li>\n<li>Orientation, cable coiling, connector protection, moisture protection, and separation of hardware.<\/li>\n<li>Artwork revision and approval status.<\/li>\n<li>Instructions that match the actual product revision.<\/li>\n<\/ul>\n<p>If the sample packaging is temporary, label it as a mock-up and record what remains open. A product can pass fitment while the packaging still fails a barcode, language, label, or bundle-content requirement. Use a conditional approval only when the open item has an owner and a defined closing action.<\/p>\n<h2 id=\"which-documents-and-traceability-records-should-accompany-a-sample\">Which Documents and Traceability Records Should Accompany a Sample?<\/h2>\n<p>Each sample should arrive with enough documentation to identify what was shipped and what the supplier claims about it. The buyer should request documents by product and revision, not as an unfiltered folder of certificates.<\/p>\n<p>Request and review:<\/p>\n<table>\n<thead>\n<tr>\n<th>Record<\/th>\n<th>Sample-stage check<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>Quotation or sample order<\/td>\n<td>Exact SKU, model, revision, quantity, variant, price, and included components match the request<\/td>\n<\/tr>\n<tr>\n<td>Datasheet and drawing<\/td>\n<td>Ratings, dimensions, materials, operating boundary, and interfaces match the physical sample<\/td>\n<\/tr>\n<tr>\n<td>Label and manual<\/td>\n<td>Product identity, warnings, instructions, language, and revision match the target market and sample<\/td>\n<\/tr>\n<tr>\n<td>Declaration, certificate, listing, or approval<\/td>\n<td>Scope, issuer, product identity, edition, date, and conditions are clear<\/td>\n<\/tr>\n<tr>\n<td>Test report<\/td>\n<td>Product or sample identity, method, date, result, and limitations are recorded<\/td>\n<\/tr>\n<tr>\n<td>Inspection or measurement record<\/td>\n<td>Critical dimensions and observed results are traceable to the sample ID<\/td>\n<\/tr>\n<tr>\n<td>Packaging file<\/td>\n<td>Artwork, barcode, language, bundle contents, and revision are controlled<\/td>\n<\/tr>\n<tr>\n<td>Traceability record<\/td>\n<td>Lot, batch, component, serial number where applicable, shipment, and supplier contact are retained<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<p>IEC 62893-1 covers construction, dimensions, and test requirements for charging cables within its stated scope. If the sample is a cable, ask the supplier to identify the relevant cable type, rating, and test evidence rather than assuming that a general cable reference covers every assembly. See IEC 62893-1:2017 as <strong><a href=\"#reference-3\">3<\/a><\/strong>.<\/p>\n<p>For a deeper evidence review, use the <strong><a href=\"https:\/\/yiroxautoparts.com\/ev-charging-accessories-certifications-test-documents\/\">EV charging accessory certification and test documents checklist<\/a><\/strong>. UL Solutions also describes safety and performance testing services for automotive cables and connectors. Treat third-party evidence as something to evaluate against the exact sample, configuration, and market boundary, not as an automatic approval for a different revision. See the UL Solutions safety and performance testing reference as <strong><a href=\"#reference-4\">4<\/a><\/strong>.<\/p>\n<p>If a required document is not available at sample shipment, mark the sample as <code>document pending<\/code> rather than <code>approved<\/code>. A conditional or document-held status makes the remaining work visible and prevents a later production order from being released on an incomplete record.<\/p>\n<h2 id=\"how-should-buyers-record-sample-results-and-approval\">How Should Buyers Record Sample Results and Approval?<\/h2>\n<p>Buyers should record each requirement, test or check, evidence, result, owner, and next action in one sample approval record. The final status should be unambiguous: <code>Approved<\/code>, <code>Approved with conditions<\/code>, <code>Rework and re-test<\/code>, <code>Rejected<\/code>, or <code>Document pending<\/code>.<\/p>\n<figure class=\"wp-block-image size-large\"><img decoding=\"async\" width=\"1448\" height=\"1086\" src=\"https:\/\/yiroxautoparts.com\/wp-content\/uploads\/2026\/09\/ev-charging-accessories-sample-order-checklist-vehicle-approval-iphone.png\" alt=\"Buyer testing an EV charging cable sample against an electric vehicle inlet at a driveway charging point\" class=\"wp-image-7772\" title=\"\" srcset=\"https:\/\/yiroxautoparts.com\/wp-content\/uploads\/2026\/09\/ev-charging-accessories-sample-order-checklist-vehicle-approval-iphone.png 1448w, https:\/\/yiroxautoparts.com\/wp-content\/uploads\/2026\/09\/ev-charging-accessories-sample-order-checklist-vehicle-approval-iphone-300x225.png 300w, https:\/\/yiroxautoparts.com\/wp-content\/uploads\/2026\/09\/ev-charging-accessories-sample-order-checklist-vehicle-approval-iphone-1024x768.png 1024w, https:\/\/yiroxautoparts.com\/wp-content\/uploads\/2026\/09\/ev-charging-accessories-sample-order-checklist-vehicle-approval-iphone-768x576.png 768w, https:\/\/yiroxautoparts.com\/wp-content\/uploads\/2026\/09\/ev-charging-accessories-sample-order-checklist-vehicle-approval-iphone-16x12.png 16w\" sizes=\"(max-width: 1448px) 100vw, 1448px\" \/><figcaption>Keep sample identity, checks, evidence, and result in one approval record that can be compared with production later.<\/figcaption><\/figure>\n<p>Use a result matrix such as this:<\/p>\n<table>\n<thead>\n<tr>\n<th>Sample ID<\/th>\n<th>Requirement<\/th>\n<th>Test or check<\/th>\n<th>Evidence<\/th>\n<th>Result<\/th>\n<th>Owner \/ next action<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>SA-001<\/td>\n<td>Connector and vehicle fitment<\/td>\n<td>Mating, locking, clearance on listed reference models<\/td>\n<td>Dated photos and fitment record<\/td>\n<td>Pass \/ exception<\/td>\n<td>Engineering confirms scope<\/td>\n<\/tr>\n<tr>\n<td>SA-001<\/td>\n<td>Electrical or functional operation<\/td>\n<td>Approved test procedure under stated conditions<\/td>\n<td>Test record and instrument reference<\/td>\n<td>Pass \/ re-test<\/td>\n<td>Quality closes result<\/td>\n<\/tr>\n<tr>\n<td>SA-001<\/td>\n<td>Dimensions and mechanical interface<\/td>\n<td>Measure against controlled drawing<\/td>\n<td>Measurement sheet and photos<\/td>\n<td>Pass \/ rework<\/td>\n<td>Supplier corrects or explains gap<\/td>\n<\/tr>\n<tr>\n<td>SA-001<\/td>\n<td>Appearance and workmanship<\/td>\n<td>Visual inspection under defined light and criteria<\/td>\n<td>Inspection photos<\/td>\n<td>Pass \/ conditional<\/td>\n<td>Buyer records accepted deviation<\/td>\n<\/tr>\n<tr>\n<td>SA-001<\/td>\n<td>Packaging and label<\/td>\n<td>Check protection, language, barcode, contents<\/td>\n<td>Packaging photos and artwork revision<\/td>\n<td>Pending \/ pass<\/td>\n<td>Packaging owner releases artwork<\/td>\n<\/tr>\n<tr>\n<td>SA-001<\/td>\n<td>Documents and traceability<\/td>\n<td>Match files to SKU, revision, lot, and sample<\/td>\n<td>Document index and shipment record<\/td>\n<td>Pass \/ pending<\/td>\n<td>Compliance owner closes gap<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<p>Do not mix observations with conclusions. Write <code>connector latch engaged on vehicle reference X; no interference observed at the stated clearance<\/code> rather than <code>good fit<\/code>. Record measured values where they matter, and link photos, drawings, reports, and correspondence to the sample ID.<\/p>\n<p>An approval should include:<\/p>\n<ul>\n<li>Sample ID, SKU, model, revision, and lot or batch.<\/li>\n<li>Product configuration and included components.<\/li>\n<li>Tested vehicle, charger, station, connector, or mounting references.<\/li>\n<li>Test conditions, tools or instruments, operator, location, and date.<\/li>\n<li>Results, deviations, open documents, and accepted conditions.<\/li>\n<li>Approved packaging, label, manual, and artwork revisions where applicable.<\/li>\n<li>Approval authority, signature or controlled electronic approval, and release date.<\/li>\n<li>Rules for future production changes and revalidation.<\/li>\n<\/ul>\n<p>The approval record should be stored with the quotation, purchase order, document pack, and later inspection record. This gives the team a reference for incoming inspection and supplier discussions without turning a sample approval into an unsupported claim of lifetime performance.<\/p>\n<h2 id=\"what-copyable-sample-order-and-approval-template-can-buyers-use\">What Copyable Sample Order and Approval Template Can Buyers Use?<\/h2>\n<p>Copy the following fields into a sample request, purchase order, or internal approval form. Use one form per configuration or clearly separate each variant under its own sample ID.<\/p>\n<h3 id=\"ev-charging-accessories-sample-order-and-approval-form\">EV CHARGING ACCESSORIES SAMPLE ORDER AND APPROVAL FORM<\/h3>\n<ul>\n<li><strong>Sample ID:<\/strong><\/li>\n<li><strong>Buyer project \/ use case:<\/strong><\/li>\n<li><strong>Target country or market:<\/strong><\/li>\n<li><strong>Sales channel:<\/strong><\/li>\n<li><strong>Buyer owner and reviewer:<\/strong><\/li>\n<li><strong>Supplier name and contact:<\/strong><\/li>\n<li><strong>Sample request date:<\/strong><\/li>\n<li><strong>Required decision date:<\/strong><\/li>\n<\/ul>\n<h4 id=\"1-sample-identity\">1. Sample Identity<\/h4>\n<ul>\n<li><strong>Buyer line-item reference:<\/strong><\/li>\n<li><strong>Supplier SKU \/ model:<\/strong><\/li>\n<li><strong>Supplier revision:<\/strong><\/li>\n<li><strong>Sample revision received:<\/strong><\/li>\n<li><strong>Lot \/ batch \/ serial reference:<\/strong><\/li>\n<li><strong>Accessory type and intended function:<\/strong><\/li>\n<li><strong>Variant description:<\/strong><\/li>\n<li><strong>Included components and accessories:<\/strong><\/li>\n<li><strong>Known alternatives or exclusions:<\/strong><\/li>\n<\/ul>\n<h4 id=\"2-fitment-references\">2. Fitment References<\/h4>\n<ul>\n<li><strong>Vehicle group and inlet reference:<\/strong><\/li>\n<li><strong>Charger, outlet, or station reference:<\/strong><\/li>\n<li><strong>Connector family and direction:<\/strong><\/li>\n<li><strong>Cable length, diameter, weight, and bend radius:<\/strong><\/li>\n<li><strong>Holder, cap, cover, mount, or hardware reference:<\/strong><\/li>\n<li><strong>Controlled drawing or photo reference:<\/strong><\/li>\n<li><strong>Models and interfaces to test:<\/strong><\/li>\n<li><strong>Models and interfaces not tested:<\/strong><\/li>\n<\/ul>\n<h4 id=\"3-technical-and-environmental-boundary\">3. Technical and Environmental Boundary<\/h4>\n<ul>\n<li><strong>AC or DC charging mode:<\/strong><\/li>\n<li><strong>Required voltage, current, and phase:<\/strong><\/li>\n<li><strong>Communication, pilot, proximity, or locking requirements:<\/strong><\/li>\n<li><strong>Temperature range:<\/strong><\/li>\n<li><strong>Indoor \/ outdoor use:<\/strong><\/li>\n<li><strong>UV, rain, dust, corrosion, cleaning, and temperature exposure:<\/strong><\/li>\n<li><strong>Mechanical load, mounting surface, fasteners, and clearances:<\/strong><\/li>\n<li><strong>Buyer-approved test procedure and conditions:<\/strong><\/li>\n<\/ul>\n<h4 id=\"4-sample-quantity-and-purpose\">4. Sample Quantity and Purpose<\/h4>\n<ul>\n<li><strong>Reference sample quantity:<\/strong><\/li>\n<li><strong>Fitment sample quantity:<\/strong><\/li>\n<li><strong>Functional or test sample quantity:<\/strong><\/li>\n<li><strong>Packaging \/ private-label sample quantity:<\/strong><\/li>\n<li><strong>Additional variant quantity:<\/strong><\/li>\n<li><strong>Return, retention, modification, or disposal instruction:<\/strong><\/li>\n<\/ul>\n<h4 id=\"5-checks-and-acceptance-criteria\">5. Checks and Acceptance Criteria<\/h4>\n<ul>\n<li><strong>Fitment, insertion, removal, locking, and clearance:<\/strong><\/li>\n<li><strong>Electrical or functional operation:<\/strong><\/li>\n<li><strong>Critical dimensions and mechanical interface:<\/strong><\/li>\n<li><strong>Cable handling, strain relief, cap or cover retention:<\/strong><\/li>\n<li><strong>Appearance, material, finish, and workmanship:<\/strong><\/li>\n<li><strong>Label, marking, manual, language, and artwork:<\/strong><\/li>\n<li><strong>Packaging protection, barcode, and bundle contents:<\/strong><\/li>\n<li><strong>Documents, test evidence, revision, and traceability:<\/strong><\/li>\n<li><strong>Defect classification and rework or re-test rule:<\/strong><\/li>\n<\/ul>\n<h4 id=\"6-documents-required-with-the-sample\">6. Documents Required With the Sample<\/h4>\n<ul>\n<li><strong>Datasheet:<\/strong><\/li>\n<li><strong>Technical drawing:<\/strong><\/li>\n<li><strong>Label \/ marking file:<\/strong><\/li>\n<li><strong>Manual \/ installation instruction:<\/strong><\/li>\n<li><strong>Declaration, certificate, listing, or approval:<\/strong><\/li>\n<li><strong>Test report and method:<\/strong><\/li>\n<li><strong>Inspection or measurement record:<\/strong><\/li>\n<li><strong>Packaging file and artwork revision:<\/strong><\/li>\n<li><strong>Document index linked to SKU and revision:<\/strong><\/li>\n<\/ul>\n<h4 id=\"7-result-record\">7. Result Record<\/h4>\n<ul>\n<li><strong>Check \/ requirement:<\/strong><\/li>\n<li><strong>Observed result:<\/strong><\/li>\n<li><strong>Measured value or reference:<\/strong><\/li>\n<li><strong>Evidence file \/ photo \/ report:<\/strong><\/li>\n<li><strong>Result:<\/strong> [pass \/ conditional \/ rework \/ reject \/ document pending]<\/li>\n<li><strong>Open issue:<\/strong><\/li>\n<li><strong>Owner:<\/strong><\/li>\n<li><strong>Due date:<\/strong><\/li>\n<li><strong>Closure evidence:<\/strong><\/li>\n<\/ul>\n<h4 id=\"8-final-decision\">8. Final Decision<\/h4>\n<ul>\n<li><strong>Overall status:<\/strong> [approved \/ approved with conditions \/ rework and re-test \/ rejected \/ document pending]<\/li>\n<li><strong>Approved SKU and revision:<\/strong><\/li>\n<li><strong>Approved configuration and included components:<\/strong><\/li>\n<li><strong>Approved vehicle, charger, station, or interface scope:<\/strong><\/li>\n<li><strong>Approved documents and packaging revisions:<\/strong><\/li>\n<li><strong>Conditions and exclusions:<\/strong><\/li>\n<li><strong>Revalidation required if:<\/strong><\/li>\n<li><strong>Buyer approval owner:<\/strong><\/li>\n<li><strong>Supplier acknowledgement:<\/strong><\/li>\n<li><strong>Approval date:<\/strong><\/li>\n<\/ul>\n<h4 id=\"9-change-control\">9. Change Control<\/h4>\n<ul>\n<li><strong>Supplier must notify buyer before changes to:<\/strong><\/li>\n<li>[ ] connector or interface<\/li>\n<li>[ ] cable, material, rating, or component<\/li>\n<li>[ ] supplier, factory, or process<\/li>\n<li>[ ] label, manual, declaration, or test evidence<\/li>\n<li>[ ] packaging, artwork, barcode, or bundle contents<\/li>\n<li><strong>Sample revalidation rule:<\/strong><\/li>\n<li><strong>Customer approval rule:<\/strong><\/li>\n<\/ul>\n<p>The form is useful because it makes open items visible. If the fitment passes but a manual revision is missing, the overall status can be <code>document pending<\/code>. If packaging needs artwork changes but the product itself is acceptable, use <code>approved with conditions<\/code> with a named owner and release point. Do not use a simple green check to hide unresolved scope.<\/p>\n<h2 id=\"how-should-buyers-control-changes-after-sample-approval\">How Should Buyers Control Changes After Sample Approval?<\/h2>\n<p>After approval, treat the sample as a controlled reference. Any change that could affect fitment, electrical or mechanical performance, appearance, documentation, packaging, market claims, or supply continuity should be assessed against the approved record.<\/p>\n<p>The supplier\u2019s change notice should identify:<\/p>\n<ul>\n<li>Affected SKU, model, revision, lot, and production date.<\/li>\n<li>What changed and why.<\/li>\n<li>The affected component, material, connector, cable, hardware, factory, process, document, label, or package.<\/li>\n<li>Fitment, technical, environmental, quality, and market impact.<\/li>\n<li>New or updated test evidence.<\/li>\n<li>Whether a new sample or partial revalidation is required.<\/li>\n<li>First affected order and remaining old-stock plan.<\/li>\n<li>Buyer approval and customer-notification requirements.<\/li>\n<\/ul>\n<p>Examples that may require review include a connector housing change, a different cable supplier, a revised strain relief, a new mounting hole pattern, a label or manual change, a packaging substitution, or a different bundled accessory. The correct response depends on the effect and evidence. The key is that the change is visible and linked to a decision.<\/p>\n<p>Use the <strong><a href=\"https:\/\/yiroxautoparts.com\/ev-charging-accessories-supplier-checklist\/\">EV charging accessories supplier checklist<\/a><\/strong> to evaluate whether the supplier has the traceability and communication capability to maintain this control. Use the sample record as the approved reference, not as a substitute for ongoing production inspection or market-specific compliance review.<\/p>\n<p>If you are approving EV charging accessory samples, share the SKU and revision, connector variants, fitment references, test conditions, packaging requirements, and open documents. We can help organize a controlled sample review before production approval. \t\t<div data-elementor-type=\"section\" data-elementor-id=\"6404\" class=\"elementor elementor-6404\" data-elementor-post-type=\"elementor_library\">\n\t\t\t<div class=\"elementor-element elementor-element-810e82a e-flex e-con-boxed e-con e-parent\" data-id=\"810e82a\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t\t<div class=\"e-con-inner\">\n\t\t<div class=\"elementor-element elementor-element-bc38255 e-con-full e-flex e-con e-child\" data-id=\"bc38255\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t<div class=\"elementor-element elementor-element-4dd0b84 elementor-widget elementor-widget-heading\" data-id=\"4dd0b84\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"heading.default\">\n\t\t\t\t\t<h2 class=\"elementor-heading-title elementor-size-default\">Get a Quote or Product Recommendation<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-cfde8b9 elementor-widget elementor-widget-text-editor\" data-id=\"cfde8b9\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t\t\t\t\t\t<p>Looking for BYD accessories, wheel balance weights, truck parts, or other auto parts? Tell us what you need, and our team will help with product options, fitment, pricing, and bulk order enquiries.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-6123d33 fluentform-widget-submit-button-custom elementor-widget elementor-widget-fluent-form-widget\" data-id=\"6123d33\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"fluent-form-widget.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\n            <div class=\"fluentform-widget-wrapper fluentform-widget-align-default\">\n\n            \n            <div class='fluentform ff-default fluentform_wrapper_4 ffs_default_wrap'><form data-form_id=\"4\" id=\"fluentform_4\" class=\"frm-fluent-form fluent_form_4 ff-el-form-top ff_form_instance_4_1 ff-form-loading ffs_default\" data-form_instance=\"ff_form_instance_4_1\" method=\"POST\" ><fieldset  style=\"border: none!important;margin: 0!important;padding: 0!important;background-color: transparent!important;box-shadow: none!important;outline: none!important; min-inline-size: 100%;\">\n                    <legend class=\"ff_screen_reader_title\" style=\"display: block; margin: 0!important;padding: 0!important;height: 0!important;text-indent: -999999px;width: 0!important;overflow:hidden;\">BLOG FORM<\/legend><input type='hidden' name='__fluent_form_embded_post_id' value='7730' \/><input type=\"hidden\" id=\"_fluentform_4_fluentformnonce\" name=\"_fluentform_4_fluentformnonce\" value=\"0bfde265ec\" \/><input type=\"hidden\" name=\"_wp_http_referer\" value=\"\/pt\/wp-json\/wp\/v2\/posts\/7730\" \/><div data-type=\"name-element\" data-name=\"names\" class=\" ff-field_container ff-name-field-wrapper\" ><div class='ff-t-container'><div class='ff-t-cell '><div class='ff-el-group ff-el-form-top'><div class=\"ff-el-input--label asterisk-right\"><label for='ff_4_names_first_name_' id='label_ff_4_names_first_name_' >Your Name<\/label><\/div><div class='ff-el-input--content'><input type=\"text\" name=\"names[first_name]\" id=\"ff_4_names_first_name_\" class=\"ff-el-form-control\" placeholder=\"Enter Your Name\" aria-invalid=\"false\" aria-required=false><\/div><\/div><\/div><\/div><\/div><div class='ff-el-group'><div class=\"ff-el-input--label ff-el-is-required asterisk-right\"><label for='ff_4_email' id='label_ff_4_email' aria-label=\"Email\">Email<\/label><\/div><div class='ff-el-input--content'><input type=\"email\" name=\"email\" id=\"ff_4_email\" class=\"ff-el-form-control\" placeholder=\"Email Address\" data-name=\"email\"  aria-invalid=\"false\" aria-required=true><\/div><\/div><div class='ff-el-group'><div class=\"ff-el-input--label ff-el-is-required asterisk-right\"><label for='ff_4_description' id='label_ff_4_description' aria-label=\"Message\">Message<\/label><\/div><div class='ff-el-input--content'><textarea aria-required=\"true\" aria-labelledby=\"label_ff_4_description\" name=\"description\" id=\"ff_4_description\" class=\"ff-el-form-control\" placeholder=\"Looking for specific auto parts or wholesale pricing? Tell us the product, vehicle model, and estimated quantity you need.\" rows=\"3\" cols=\"2\" data-name=\"description\" ><\/textarea><\/div><\/div><div class='ff-el-group ff-text-left ff_submit_btn_wrapper'><button type=\"submit\" class=\"ff-btn ff-btn-submit ff-btn-md ff_btn_style\"  aria-label=\"Submit Form\">Submit Form<\/button><\/div><\/fieldset><\/form><div id='fluentform_4_errors' class='ff-errors-in-stack ff_form_instance_4_1 ff-form-loading_errors ff_form_instance_4_1_errors'><\/div><\/div>            <script type=\"text\/javascript\">\n                window.fluent_form_ff_form_instance_4_1 = {\"id\":\"4\",\"ajaxUrl\":\"https:\\\/\\\/yiroxautoparts.com\\\/wp-admin\\\/admin-ajax.php\",\"settings\":{\"layout\":{\"labelPlacement\":\"top\",\"asteriskPlacement\":\"asterisk-right\",\"helpMessagePlacement\":\"with_label\",\"errorMessagePlacement\":\"inline\",\"cssClassName\":\"\"},\"restrictions\":{\"denyEmptySubmission\":{\"enabled\":false}}},\"form_instance\":\"ff_form_instance_4_1\",\"form_id_selector\":\"fluentform_4\",\"rules\":{\"names[first_name]\":{\"required\":{\"value\":false,\"message\":\"This field is required\",\"global_message\":\"This field is required\",\"global\":true}},\"names[middle_name]\":{\"required\":{\"value\":false,\"message\":\"This field is required\",\"global_message\":\"This field is required\",\"global\":true}},\"names[last_name]\":{\"required\":{\"value\":false,\"message\":\"This field is required\",\"global_message\":\"This field is required\",\"global\":true}},\"email\":{\"required\":{\"value\":true,\"message\":\"This field is required\",\"global_message\":\"This field is required\",\"global\":true},\"email\":{\"value\":true,\"message\":\"This field must contain a valid email\",\"global_message\":\"This field must contain a valid email\",\"global\":true}},\"description\":{\"required\":{\"value\":true,\"message\":\"This field is required\",\"global_message\":\"This field is required\",\"global\":true}}},\"debounce_time\":300,\"file_upload_settings\":[]};\n                            <\/script>\n                        <\/div>\n\n            \t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<\/p>\n<h2 id=\"conclusion-approve-a-controlled-reference-not-a-verbal-promise\">Conclusion: Approve a Controlled Reference, Not a Verbal Promise<\/h2>\n<p>An EV charging accessories sample order should end with a recorded decision. Define the exact SKU and revision, order enough variants to represent the intended use, test fitment and function against named references, inspect appearance and packaging, match documents to the sample, and record the result with evidence.<\/p>\n<p>Before releasing production, make sure the approval record states the approved configuration, supported interfaces, conditions, exclusions, open documents, packaging revision, and change-control rule. That record gives procurement, quality, engineering, product, and operations the same reference when the first production lot arrives.<\/p>\n<p>If you need help defining the sample set or acceptance record, <strong><a href=\"https:\/\/yiroxautoparts.com\/contact\/\">request a sample-approval review<\/a><\/strong> with the target market, product list, fitment references, test conditions, and document requirements. A structured review can expose missing variants or evidence before they become a production or listing issue.<\/p>\n<h2 id=\"frequently-asked-questions\">Frequently Asked Questions<\/h2>\n<h3 id=\"what-is-the-difference-between-a-sample-order-and-a-production-qc-inspection\">What is the difference between a sample order and a production QC inspection?<\/h3>\n<p>A sample order is a pre-production decision process. It defines the configuration, tests fitment and function, checks documents and packaging, and records whether the buyer will approve the product. Production QC checks whether later units continue to match the approved reference and the agreed inspection plan.<\/p>\n<h3 id=\"should-a-sample-order-include-the-exact-supplier-sku-and-revision\">Should a sample order include the exact supplier SKU and revision?<\/h3>\n<p>Yes. Record the supplier SKU, model, revision, lot or batch, included components, and variant details. If the supplier cannot identify the exact configuration, keep the sample at an evaluation or document-pending status until the identity is controlled.<\/p>\n<h3 id=\"how-many-ev-charging-accessory-samples-should-a-buyer-request\">How many EV charging accessory samples should a buyer request?<\/h3>\n<p>Request enough units to cover the intended decision: reference, fitment, functional or test, packaging, and each material connector, length, mounting, or market variant that cannot be represented by one sample. The final quantity depends on the buyer\u2019s test plan and risk, so record the reason for the chosen count.<\/p>\n<h3 id=\"can-one-sample-prove-compatibility-with-every-ev-model\">Can one sample prove compatibility with every EV model?<\/h3>\n<p>No. A sample can be tested against named vehicle, charger, connector, or station references. Broader compatibility requires a defined mapping, test scope, dimensions, and exclusions. Record which models were tested and which were not.<\/p>\n<h3 id=\"what-if-the-sample-passes-but-the-documents-are-incomplete\">What if the sample passes but the documents are incomplete?<\/h3>\n<p>Use <code>document pending<\/code> or <code>approved with conditions<\/code>, depending on the buyer\u2019s release rules. Name the missing document, owner, due date, and closing evidence. Do not treat a physical fitment pass as proof that the complete target-market product pack is ready.<\/p>\n<h3 id=\"when-should-a-supplier-send-a-new-sample\">When should a supplier send a new sample?<\/h3>\n<p>Request a new sample when the product, connector, cable, material, rating, dimensions, packaging, label, manual, or other controlled element changes in a way that could affect the approval decision. The change record should state whether full or partial revalidation is required.<\/p>\n<h3 id=\"does-sample-approval-replace-certification-or-regulatory-review\">Does sample approval replace certification or regulatory review?<\/h3>\n<p>No. Sample approval confirms the buyer\u2019s defined fitment, function, appearance, documents, packaging, and acceptance criteria. Applicable standards, declarations, listings, certifications, installation requirements, and market obligations still require the appropriate technical or compliance review.<\/p>\n<h2 id=\"references\">References<\/h2>\n<p id=\"ref-1\"><a id=\"reference-1\"><\/a>[1] International Electrotechnical Commission. \u201c<a href=\"https:\/\/webstore.iec.ch\/en\/publication\/33644\" target=\"_blank\" rel=\"noopener\">IEC 61851-1:2017 Electric vehicle conductive charging system &#8211; Part 1: General requirements<\/a>.\u201d 2017.<\/p>\n<p id=\"ref-2\"><a id=\"reference-2\"><\/a>[2] International Electrotechnical Commission. \u201c<a href=\"https:\/\/webstore.iec.ch\/en\/publication\/59922\" target=\"_blank\" rel=\"noopener\">IEC 62196-1 Plugs, socket-outlets, vehicle connectors and vehicle inlets &#8211; Conductive charging of electric vehicles &#8211; Part 1<\/a>.\u201d 2022.<\/p>\n<p id=\"ref-3\"><a id=\"reference-3\"><\/a>[3] International Electrotechnical Commission. \u201c<a href=\"https:\/\/webstore.iec.ch\/en\/publication\/30590\" target=\"_blank\" rel=\"noopener\">IEC 62893-1:2017 Charging cables for electric vehicles for rated voltages up to and including 0,6\/1 kV &#8211; Part 1: General requirements<\/a>.\u201d 2017.<\/p>\n<p id=\"ref-4\"><a id=\"reference-4\"><\/a>[4] UL Solutions. \u201c<a href=\"https:\/\/www.ul.com\/services\/automotive-cable-safety-and-performance-testing\" target=\"_blank\" rel=\"noopener\">Safety and Performance Testing for Automotive Cables and Connectors<\/a>.\u201d 2025.<\/p>\n","protected":false},"excerpt":{"rendered":"<p>An EV charging accessory sample order should define the exact SKU or revision, connector and fitment, quantity and variants, target market, test conditions, documents, packaging expectations, and approval criteria. Record the approved sample so later production can be compared with a controlled reference instead of an informal prototype or product photo. A sample is not [&hellip;]<\/p>\n","protected":false},"author":2,"featured_media":7841,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"footnotes":""},"categories":[26],"tags":[],"class_list":["post-7730","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-blog"],"acf":[],"_links":{"self":[{"href":"https:\/\/yiroxautoparts.com\/pt\/wp-json\/wp\/v2\/posts\/7730","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/yiroxautoparts.com\/pt\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/yiroxautoparts.com\/pt\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/yiroxautoparts.com\/pt\/wp-json\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/yiroxautoparts.com\/pt\/wp-json\/wp\/v2\/comments?post=7730"}],"version-history":[{"count":3,"href":"https:\/\/yiroxautoparts.com\/pt\/wp-json\/wp\/v2\/posts\/7730\/revisions"}],"predecessor-version":[{"id":7842,"href":"https:\/\/yiroxautoparts.com\/pt\/wp-json\/wp\/v2\/posts\/7730\/revisions\/7842"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/yiroxautoparts.com\/pt\/wp-json\/wp\/v2\/media\/7841"}],"wp:attachment":[{"href":"https:\/\/yiroxautoparts.com\/pt\/wp-json\/wp\/v2\/media?parent=7730"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/yiroxautoparts.com\/pt\/wp-json\/wp\/v2\/categories?post=7730"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/yiroxautoparts.com\/pt\/wp-json\/wp\/v2\/tags?post=7730"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}