This is a plain wheel center cap set for Tesla owners and resellers who want the hub of the wheel to stay clean, with no emblem, lettering or pattern on the face. Each set has four caps, and you can choose a gloss black face or a brushed silver aluminium face. The Tesla version uses a dedicated 57mm cap, and the same plain faces are made in 56mm, 58mm and 60mm for aftermarket wheels.
Why would a buyer want a cap with no logo at all?
Many Tesla owners debadge the car, wrap it, or fit aftermarket rims, and a branded cap then looks out of place. A blank cap gives a quiet, finished centre that suits a stealth build or a monochrome wrap. Wheel shops also like plain caps because one part can finish a rim without carrying anyone else’s brand, and the smooth face is a good base for a customer’s own sticker or print.
Which finishes can I choose from?
Two finishes are offered, and both are sold as sets of four.
| Finish | What the face looks like | Good match for |
|---|---|---|
| Gloss black | A smooth, mirror-like black face with a black rim | Black wheels, chrome-delete builds and dark wraps |
| Brushed silver | A spun aluminium face with fine circular brushing and a bright polished edge | Silver or grey wheels and a factory-style look |
You can mix finishes in one order, for example gloss black for black wheels and brushed silver for silver ones, as long as each set of four is one finish.
What sizes are available, and how do I measure?
The photos mark three measurements on every cap: A is the outer face diameter, B is the width across the clips where they leave the cap, and C is the width across the clip tips. The clip width is what has to match the bore in your wheel.
| Size | Use | Dimensions shown in photos |
|---|---|---|
| 57mm Tesla | Dedicated cap made for Tesla wheels | Tesla-specific clip |
| 56mm | Aftermarket wheels | Measure your bore |
| 58mm | Aftermarket wheels | A 58mm, B 53mm, C 55mm (gloss black) |
| 60mm | Aftermarket wheels | A 60mm, B 56mm, C 58mm (gloss black); A 60mm, B 54.5mm, C 56.5mm (brushed silver) |
The supplier also lists other plain sizes from 54mm up to 75mm, such as 63mm, for rims outside the range above. If you are fitting caps to aftermarket wheels, measure the bore and the old cap before you order, as the supplier advises on its size charts.
How do the caps fit on the wheel?
As the photos show, each cap has moulded clips on the back that press into the centre bore of the wheel. No tools or adhesive are needed. To change a cap, you lever it out gently from the edge and press the new one in until the clips seat.
Do they work with Tesla wheel covers?
These caps are for the wheel itself. If you want to cover the whole wheel face, see our full aero disc Tesla wheel covers or the smooth cyber-style covers. For a sportier face there are the lancer covers and the hex-spoke covers for the Model Y Juniper, while the Mini Aero covers sit over the centre of the wheel only. Many accessory shops stock the plain caps next to these covers so customers can finish the look in one visit.
Who usually orders plain center caps?
Our buyers are Tesla accessory stores, tyre and wheel shops, wrap studios and online sellers. Fleets also keep spare caps on hand, since a cap is easy to lose at a tyre change. Low MOQ on selected items, so a shop can start with a mix of finishes and sizes.
What should I include in my inquiry?
- The car or wheel: Tesla model and year, or the aftermarket wheel brand and model
- Cap size: 57mm Tesla, 56mm, 58mm, 60mm or another size
- Finish: gloss black or brushed silver
- Number of four-piece sets per size and finish
- Any packing or labelling needs for retail
Send these details through our contact page and we will reply with the matching cap, packing options and lead time.
Questions buyers often ask
Is there any logo on these caps?
No. Both the gloss black and brushed silver faces are completely plain.
How many caps come in a set?
Each set has four caps, one for every wheel.
Which size do I need for a Tesla?
Order the 57mm Tesla cap, which is made with the clip for Tesla wheels.
Can I use these caps on aftermarket wheels?
Yes. The 56mm, 58mm and 60mm caps are made for aftermarket rims, so measure the bore first.
Can I add my own print or sticker?
Yes. The flat, blank face is a clean base for your own sticker or print.
