Get the certificates and test documents your market asks for, matched to every product line. With ISO 9001 and IATF 16949 quality systems, REACH material compliance and product-level marks such as E-mark, DOT, CE and RoHS for the relevant models, you can pass customer audits and customs checks and protect your brand, without chasing paperwork.
These certifications cover our factory and processes, so every product line is made and inspected under the same controlled system. Copies are provided with your quotation on request.
Quality management system covering design, production and inspection.
Automotive quality management standard for parts suppliers, covering process control and traceability.
EU chemical and material compliance for the materials used in our parts.
Yirox can provide the relevant certificates for each category. Product-level marks apply to the relevant products and models; send us your SKUs and target market and we will confirm what is available.
| Product line | Certificates available | Reports & documents |
|---|---|---|
| Exterior Styling PartsBody kits, front lips, spoilers, side skirts, diffusers, chrome grilles | ISO 9001, IATF 16949, REACH material compliance, RoHS; E-mark (ECE) for models with integrated lighting | Material test reports, chrome plating and salt-spray test reports, fit-check reports |
| Replacement Body PartsBumpers, grilles, exterior trim for vehicle-specific replacement | ISO 9001, IATF 16949, REACH; E-mark (ECE) and DOT (FMVSS 108) for relevant lighting models | PPAP on request, dimensional inspection reports, material certificates |
| Pickup AccessoriesTonneau covers, electric running boards, truck bed parts | ISO 9001, IATF 16949, REACH, RoHS; CE/EMC for electric and powered models | Salt-spray, load and durability test reports, final inspection reports |
| EV Aftermarket PartsModel-specific EV exterior, frunk and interior upgrade parts | ISO 9001, IATF 16949, REACH, RoHS; CE and FCC for models with electronics | Material declarations, inspection reports, electrical test reports where relevant |
| Wheel & Tire AccessoriesWheel covers, hubcaps, wheel balancing weights (made in our own factory) | ISO 9001, IATF 16949; ELV, REACH and RoHS for wheel balancing weights (lead-free options); REACH material compliance for wheel covers | Material composition reports, plating and adhesion test reports, salt-spray reports |
E-mark (ECE), DOT, CE and FCC are product-level marks and apply only to the relevant models. Ask us to confirm for your part numbers.
Every step from molding to chrome plating is done in-house, so we control quality ourselves instead of relying on subcontractors.
Resin, steel and plating materials are checked against material certificates.
The first parts are measured and approved against your drawing or sample.
Molding, painting, chrome plating and assembly are checked at each in-house step.
Appearance, dimensions and fit are inspected before packing, and a report is issued.
Parts are packed with foam supports and labelled by SKU for export.
Your inspector can check the goods before the 70% balance payment.
Depending on the product and project, we can provide:
PPAP is available, and the level and contents are discussed per project. An NDA can be signed before you share drawings.
Yirox holds design patents for several of its own product designs, so you can source original designs from the factory that owns them.
Yes. Yirox holds ISO 9001 and IATF 16949 quality management certifications, and we can provide copies of the relevant certificates with your quotation or before you place an order.
It depends on the product line. All lines are covered by ISO 9001, IATF 16949 and REACH material compliance. Product-level marks such as E-mark (ECE), DOT, CE, RoHS and FCC apply to the relevant products and models. Tell us the SKUs and your target market and we will confirm the certificates available.
E-mark (ECE) and DOT (FMVSS 108) apply to the relevant products and models, mainly parts with integrated lighting. Please send the part number or model so we can confirm which marks it carries.
Yes, PPAP is available. The submission level and document package are discussed per project, together with your quality requirements.
Yes. Our wheel balancing weights are made in our own factory, and we can provide the corresponding ELV, REACH and RoHS compliance documents, including for lead-free steel and zinc weights.
A final inspection report and packing list come as standard. Material certificates, test reports (such as salt spray or plating adhesion), compliance declarations and PPAP are available depending on the product and project.
Yes. You can arrange a third-party inspection at our factory before the 70% balance payment and shipment.
Yes. Yirox holds design patents for several of our own product designs, as shown on this page.
We will reply with the certificates and test reports available for your SKUs.
Prefer email? Use our contact page.
