Can you use stick-on weights inside steel wheels?
Yes. These lead-free steel (Fe) stick-on strips of four 5g and four 10g segments (60g), zinc plated with blue tape, are listed for steel wheels, where an adhesive weight keeps the outer flange clean.
Some fleets and car owners want steel wheels to look clean from the outside, so workshops fit stick-on weights inside the barrel instead of clips on the flange. This mixed strip is made for that job. Classic car owners and fleet managers who dislike the look of clips on the outer rim are the usual reason shops order them.
Is zinc plating enough inside a steel wheel?
Inside a steel wheel the weight is protected from direct spray, so zinc plating gives enough rust protection at a low cost and keeps the strip bright.
Clip weights on a steel wheel are visible from the outside and can mark painted rims. Sticking the weight inside the barrel avoids both problems. The mixed 5g and 10g pattern then keeps the job quick, because most corrections need only two or three pieces. Steel barrels are usually painted or powder coated, which gives the tape a smooth surface to bond to once it is clean. That makes a stick-on weight a practical choice on steel wheels, not just on alloys.
Blue, branded or colour-coded tape?
Steel barrels are often painted, so a reliable tape matters. Blue tape is standard, and branded tapes are available.
| Tape | Typical use |
|---|---|
| Blue tape | Standard blue tape for everyday workshop balancing |
| 3M or Norton tape on request | Branded tapes for customers who ask for a named adhesive |
What are you ordering?
| Product type | Adhesive / stick-on wheel balance weight |
|---|---|
| Material | Steel (Fe), lead-free |
| Weight pattern | 5g+10g x 4 |
| Surface treatment | Zinc plated |
| Tape | Blue adhesive tape |
| Suitable for | Steel wheels and rims |
Is this the right weight for your wheels?
For alloy-wheel strips in the same pattern, compare steel adhesive truck wheel weights 50g x 2 and 100g zinc plated and thick steel adhesive wheel weights 15g / 20g / 25g / 30g segments 7mm. If you prefer a clip on the flange, see rounded corner steel adhesive wheel weights 5g x 12 grey / black or MC Series Steel Clip-On Wheel Balancing Weights Zinc Plated.
Which customers buy it most?
They stick to the inner barrel of steel wheels on cars and vans. The 5g and 10g pieces let technicians reach most corrections in a few cuts. Shops that do this regularly keep a box beside the balancer used for steel wheels. They also suit wheel trims and hubcaps that sit over the flange, where a clip weight could get in the way.
How do you make sure they stay put?
Clean the painted barrel carefully, including any old adhesive. Fit at room temperature, press the pieces on firmly and spin the wheel to confirm. Remove any old clip-weight residue and road film from the barrel before fitting.
How is the order shipped?
Mixed strips for steel-rim use come in standard boxes, and the strips per box can be adjusted. Steel-rim strips travel in export cartons by sea or air.
Do you offer custom packing and colours?
Yes. We can print your brand on the boxes and supply the strip on a different tape colour if you want to separate steel-wheel stock from alloy stock.
What details speed up a quote?
Mixed strips for steel wheels are available for wholesale and bulk orders, with low MOQ on selected items. A quote needs:
- Quantity (boxes or pieces)
- Strip pattern or sizes
- Finish or colour
- Tape type
- Standard or private label packing
- Destination port or country
Send your inquiry to Yirox and we will reply with the options for these mixed strips.
Frequently asked by distributors
Can stick-on weights go inside steel wheels?
Yes, on a clean barrel they bond well and keep the outside tidy.
What is the pattern?
5g+10g x 4.
Is it lead-free?
Yes, zinc plated steel.
Private label?
Yes.
Will a hubcap clear the weight?
Usually yes, because the weight sits inside the barrel rather than on the flange.
