Toyota SUV, Pickup & Van Mud Flaps: Land Cruiser, Hilux, RAV4, Hiace

This is our largest mud flap range: model-specific splash guards for Toyota off-roaders, pickups, crossovers and vans. Each set is moulded in black PP to follow the wheel arch of one body, from the LC80 Land Cruiser to the 2024 Prado J250, Hilux GR Sport and new Tacoma.

Why do Toyota 4×4 and pickup owners fit mud flaps first?

Land Cruisers, Hilux pickups and Hiace vans spend their lives on gravel, building sites and wet rural roads. Stones and slurry thrown off the tyres chip the sills, the rear doors and anything towed behind. A moulded flap closes that gap behind each wheel, and because it follows the arch line it looks like a factory part rather than a truck-stop add-on.

Which Toyota bodies and years are covered?

The table lists every Toyota SUV, pickup and van version we stock. Land Cruiser LC200 and Innova have separate parts for cars with and without a body kit, and the Yaris Cross has a GR and a non-GR set, so check the trim before ordering.

How do I pick the right set for a mixed Toyota fleet?

Start with the chassis code rather than the badge. A “Prado” can be an FJ90, FJ120, FJ150 or J250, and each arch is different. Hilux buyers should also note 2WD or 4WD, because the low-ride 2WD body uses its own flap. If you also sell Toyota passenger cars, the Toyota sedan and hatchback mud flaps page covers Camry, Corolla and Yaris. For load-bed and bumper parts, browse our truck exterior accessories.

What are the flaps made of?

Every set is injection-moulded polypropylene in matte black. PP stays flexible in the cold, springs back when it hits a rut and does not crack the way hard ABS can. The LC90 set, for example, measures 285 x 305 mm at the front and 325 x 305 mm at the rear, with a net weight of 1,240 g for four pieces.

Is installation a garage job or a driveway job?

Most sets bolt into the existing screw points in the arch liner, so a driver can fit them with a screwdriver in about half an hour. A few older models need one extra hole on the lower edge. Every box includes the screws and clips.

How are they packed, and can you supply OEM?

Each four-piece set is packed in its own poly bag and carton, and bulk orders are master-cartoned for sea freight. We can add your logo, change the colour, print your own retail box or open a new mould for a model not listed. We offer low MOQ on selected items, which suits importers testing a new body style.

What should I send with my inquiry?

• Model, chassis code and year range
• 2WD or 4WD, and body kit or standard bumpers
• Quantity per model
• Plain or branded packing
• Destination port

Quick answers for buyers

Do the LC300 flaps fit the Lexus LX600?

No. They are moulded for the Land Cruiser LC300 arch only.

Are Hilux Revo and Vigo flaps interchangeable?

No. Order by year: Vigo up to 2015 and Revo from 2015.

Do I need to drill?

Most sets use existing holes. A few older models need one extra hole.

Can I mix models in one carton?

Yes. Mixed-model orders are packed by model inside one shipment.

Ready to stock this series?

Send your model list and quantities through our contact page, and our team will reply with fitment checks and packing details.